|
Model MPA
Closed radial Impeller and U-turn diffuser design
• Horizontal shaft design
• Axial suction nozzle
• Radial discharge nozzle (left, top, right)
• Drive on discharge side
• Radial/Axial roller bearing on drive side
• Plain bearing on suction side
• Axial thrust balancing by drum design
• Shaft sealing on discharge side only
• Bare shaft or pump unit
• Driver: electric motor - IEC or NEMA standard
• IC-engine, turbine
• Temperature range: (-25°C) -10°C to 140°C (180°C)
• Inlet pressure: up to 10 bar
|
Model MPR
Closed radial Impeller and U-turn diffuser design
• Horizontal shaft design
• Axial suction nozzle
• Radial suction nozzle (left, top, right)
• Radial discharge nozzle (left, top, right)
• Drive on discharge side
• Radial/Axial roller bearing on drive side
• Plain bearing on suction side
• Axial thrust balancing by drum design
• Shaft sealing on discharge side only
• Bare shaft or pump unit
• Driver: electric motor - IEC or NEMA standard
• IC-engine, turbine
• Temperature range: (-25°C) -10°C to 140°C (180°C)
• Inlet pressure: up to 10 bar
|
|
Model MPD
Closed radial Impeller and U-turn diffuser design
• Horizontal shaft design
• Axial suction nozzle
• Radial suction nozzle (left, top, right)
• Radial discharge nozzle (left, top, right)
• Drive on discharge side (optional suction side)
• Radial/Axial roller bearing on drive side
• Radial roller bearing on suction side
• Axial thrust balancing by drum design
• Shaft sealing on suction and discharge side
• Bare shaft or pump unit
• Driver: electric motor - IEC or NEMA standard
• IC-engine, turbine
• Temperature range: (-25°C) -10°C to 140°C (180°C)
• Inlet pressure: up to 40
|
Model MPV
Closed radial Impeller and U-turn diffuser design
• Vertical shaft design
• Radial suction nozzle (0°, 90°, 180°, 270°)
• Radial discharge nozzle (0°, 90°, 180°, 270°)
• Drive on discharge side
• Radial/Axial roller bearing on drive side
• Plain bearing on suction side
• Axial thrust balancing by drum design
• Shaft sealing on discharge side only
• Bare shaft or pump unit
• Driver: electric motor - IEC or NEMA standard up to 355kW (400kW)
• Temperature range: (-25°C) -10°C to 140°C
• Inlet pressure: up to 10 bar
|
