MONO Pumps Muncher Family
SB Muncher
Designed as an effective sewage grinder and to replace high speed macerators, the SB Muncher can save up to 85% of the energy requirements of a centrifugal force system. Typically it has a cutting tip speed 90% less than a high speed macerator system and also much lower vibration and noise levels.
Being of a compact size for the smaller capacity flows, the unit operates as an independent unit for open channel or pipeline configuration. When combined with a Mono transfer pump, the package provides a highly efficient sewage pumping system.
The SB Muncher carries a 3 year warranty when installed to Mono's recommendations.
This Muncher is also very effective when macerating waste water sludges containing heavy and fibrous material.
Capacity | Pressure | ||
---|---|---|---|
m³/h | Up to 60 | bar | Up to 0.5 |
gpm | Up to 264 | psi | Up to 7 |
Applications
Pump protection; Industrial effluents; Raw sewage; Abrasive and heavy sludges; Organic waste maceration; Kennel and livestock waste
Series A Muncher
The reliable Series 'A' Muncher® is well proven in its ability to effectively macerate raw sewage, sludges, sewage screenings and industrial process flows. Available for pipeline or channel installations, the shaft speed of 85 rpm offers low cutter tip speeds and therefore dramatically reduces wear rates in comparison to high speed macerators.
The Series 'A' Muncher can be packaged with a Mono transfer pump or screen to provide a highly effective macerating, screening or pumping system.
Capacity | |
---|---|
m³/h | Up to 1,400 |
gpm | Up to 6,164 |
Applications
Protection of pumps to eliminate blockages; Submersible pump protection; Fine grinding of sewage and sludges; Disintegration of extracted screenings; Head of works maceration; Industrial sewage maceration; Mud contaminated drill cuttings; Food products and waste; Slaughterhouse waste; Aircraft sewage; Prison waste water maceration
EZstrip™ TR Munchers
CT201
A new addition to the EZstrip™ family of products, the CT201 TR Muncher® has been designed specifically to meet on-site tanker discharge requirements and sludge/fat processing, for maceration of solids within the flow and protection of downstream equipment from blockages.
Installation of the EZstrip™ CT201 TR Muncher® is simple, with in-line flanges or the option of tanker coupling connections. Quick release inspection covers also allow in-situ replacement of the cutters, which can be specified to either 8.0mm, 5.5mm and 3.0mm thickness, to match the optimum particle size for specific process requirements.
CT203/CT205
Designed specifically for the efficient maceration of abrasive sludges, the EZstrip™ CT203/05 TR Munchers are very effective in capturing irregular shaped objects. The layback cutter shafts on this Muncher are set at an angle to the incoming flow. If a rejection cycle is necessary, the object can drop into the built-in trash trap set clear of and below the cutter stacks, preventing damage. The trash trap is fitted with a large diameter access port to enable easy removal, cleaning and flushing.
Capacity | Pressure | ||
---|---|---|---|
m³/h | 100 (CT201) 500 (CT203/205) | bar | 0.4 (CT203/205) |
gpm | 440 (CT201) 2,200 (CT203/205) | psi | 5 (CT203/205) |
Applications
Tanker reception; Pump protection; Fat/sludge conditioning; Abrasive sludge maceration; Screenings in wash water; Organic waste maceration
Series F Muncher
The Series F Muncher is a heavy duty grinder, ideal for bulk reduction, material reclamation and profit from waste. The operating principle is based on independent drive shafts offering greater torque and variable particle size is determined by the cutter/spacer arrangement. The unit can be supplied with a feed hopper or delivery chute to assist material entry and discharge.
For improved processes at Bio Gas plants, the Series F Muncher has been successful in the maceration and reduction of organic waste to a small particle size, to offer a more homogeneous mixture. By introducing this homogeneous waste to digesters, gas production is increased, which is a benefit for combined heat and power systems. The need for costly disposal is also eliminated.
Capacity | |
---|---|
kg/h | Up to 10,000 (26,000 lbs) |
Applications
Bio-degradable waste; Sewage screenings; Bulk/container waste; Animal and fish waste; Municipal green waste
Found 22 products